7
Specifications (AL):
Physical
Length:
500 mm
Width:
225 mm
Height:
165 mm
Dry weight:
11 kg
Performance
Max. smoke output (approx.):
500 m
3
per minute
Max. operating time at full output (approx.):
80 mins
Operating time:
Continuous, automatic level adjustment
Warm-up time:
Approx. 7 minutes
Control and Programming
Control options:
Remote control (supplied) or DMX with optional DMX interface module
Remote control features:
Instant or timer-controlled output, 0-100% adjustable output level
Timer Range: Delay 2-18 secs (X1), 16-144 secs (X8) / Run Time 2-18 secs (X1), 16-144 secs (X8)
Fluid System
Fluid pump:
Oscillating piston, high pressure
Onboard fluid capacity:
2.5 l
Max. fluid consumption at peak output:
75 ml per minute
Construction
Housing:
Steel & aluminium
Heat exchanger:
1000 W, direct thermal protection
Installation
Orientation:
Floor (No Flying Kit Available)
Connections
Remote control:
5-pin DIN
0-10 V analogue:
5-pin DIN
Power cable entry:
Hard-wired
Electrical
AC power (EU models):
220-240 V nominal, 50 Hz
AC power (US models):
110-120 V nominal, 60 Hz
Main fuse (220-240 V power):
5 AT (slow blow)
Main fuse (110-120 V power):
10 AT (slow blow)
Typical Power and Current
US model
110 V, 60 Hz:
1070 W, 9.72 A
115 V, 60 Hz:
1169 W, 10.16 A
120 V, 60 Hz:
1273 W, 10.61 A
EU model
220 V, 50 Hz:
899 W, 4.08 A
230 V, 50 Hz:
982 W, 4.27 A
240 V, 50 Hz:
1070 W, 4.45 A
Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Thermal
Maximum ambient temperature (Ta max.):
40° C
Exterior surface temperature, steady state:
50° C
Max. nozzle temperature:
200° C
Approvals
EU safety:
EN 50 081-1, EN 50 082-1
EU safety:
EN 60 335-1 (1995)
Accessories
Pro Smoke Studio (DX Mix) fluid, various sizes available
Pro Smoke Super (ZR Mix) fluid, various sizes available
Pro Smoke Super (Fragranced) fluid, various sizes available
Pro Smoke High Density (SP Mix) fluid, various sizes available
I-fog fluid, various sizes available
Ducting Kit (Including adapter and 5m of 4-inch (104mm) ducting):
P/N 92625004
DMX Interface ZR12:
P/N 92765015
Ordering Information
JEM ZR12 AL, 110V:
P/N 92215101
JEM ZR12 AL, 240V:
P/N 92215100
Service Info (internal only - do not publish)
Cooling time before service or maintenance:
20 minutes
Minimum clearance around air vents:
0.20 m
Summary of Contents for ZR12-DMX
