Repair instructions
4. Assembly
Place ball for fixing screwdriver bit into hole
Slide sleeve and spring onto shaft (do not lose ball)
Slide sleeve and spring onto shaft (do not lose ball)
Place spacer ring on spring and push everything downwards together
Fit circlip – warning: this requires some patience because of the spring tension!!!
Tool
External circlip pliers
Small slotted screwdriver
All rights reserved by FEIN, especially in case of industrial rights registration.
Any power of disposition such as copying and right of transfer is situated with FEIN.
C-SC_CSSM
Page 18/26
05.2012
