1.Remove the bracket on the back of the panel
.Pull down the bracket
as shown, release the bracket.
Control panel installation
:
tamper switch
SIM cover
wires slot
wires slot
2.Mark the surface to be drilled, drill holes and fix the
bracket using screws and dowel on the wall.
Fixing holes
fixing hole
Mounting Knockout
Mounting holes
3.As shown in the below figure slide and fix the control
panel on the bracket
Metal
3.1 Make sure that there are no large
metal surfaces close to the control unit.
3.2 Make sure that communication between the
alarm control panel and sensors is stable.
Push the bracket along the arrow pointed
Remove the bracket
70
INSTALLATION & WIRING
Summary of Contents for JKAL37BR
Page 2: ......