GSM DIALER
GSM DIALER BRIEFS
Inizialization GSM dialer
SIM CARD insertion
1 TURN OFF THE CONTROL PANEL
To completely turn off the control panel
adapter from the main ; type user password, press the # key for 3
seconds.
2
REMOVE THE GSM COVER as shown below:
3
Open the
simholder pushing toward the top of the control panel
and lift up, after that once theSIM card is inserted with the
contacts facing down,replace it in its original position.
4
REPOSITION AND CLOSE THE GSM COVER
5
Connect the AC / DC adapter and the control panel turns on
automatically.
6
For a minute the display will show the initialization phase of the
GSM searching the network and showing information <65
5,2,3,4>. When the initialization phase is ended the control panel
shows the calendar, time and status information :
The control panel is ready to receive the setting commands for
the GSM module.(mentioned in chapter 7)
If initialization phase is not completed within a few minutes,Turn
off the control panel and pull out the SIM card and check it with a
mobile phone.
disconnect the AC/DC
WARNING:MAKE SURE THAT THE SIM SIM CARD DO NOT REQUIRE
THE PIN CODE. IF NOT CANCEL THE PIN USING A GSM MOBILE PHONE.
INSERT THE SIM CARD ONLY AFTER TURN OFF THE PANEL
1 2 3 4
105
Summary of Contents for JKAL37BR
Page 2: ......