22
21
Wiring cable Monitor / outdoor unit
Monitor positioning e installation
After defining the position of the monitor, fix the bracket to the wall
After defining the position of the monitor and the outdoor unit and verifying the length of the
connection cable required, select the appropriate section of the cables according to the distance.
30m
50m
Depending on the total length of the cable is important that the wire has the correct section.
Failure to do so may result in malfunction of the system.
Herebeloew are some cable suggestion.and recommendation
For distances of over 50m we recommend the use of UTP cat.5
(4 pairs) using for
power (negative and positive) both wires of the pair.
cable
Cable lenght
Recommended Cable
2
4 x 0,30mm
2
4 x 0,50mm o cavo UTP cat.5
Rosso
Nero
Giallo
Bianco
1
2
3
4
Install clevis connectors on the cable wies . Connect the wires paying
careful attention to the correct connection as shown below
System cable
White(Audio)
Red(VDD)
Black(GND)
Yellow(Video)
The correct height for themonitor installation
is145-160cm from the center of
Screen display and the floor
Use screws and tyhe accessories supplied to fix the
bracket
to the wall paying attention to the
wiring exit .
mounting
cables
Positioning
1
2
3
4
1
4
5
c
m
1
6
0
c
m
～
Pull the unit to the bracket fixed to the wall, when the unit is flush with the wall
push it down to complete the coupling
230 V
230 V
Connect the 'power supply into the socket on the rear side of the monitor
Rear view of the monitors EASY 4430i 4200i
Rear view of the monitor EASY 4700i
Power
DC 15V
Power
DC 15V
DC 15V
T
E
S
T
AUDIO
GND
VDD
VIDEO
AUDIO
GND
VDD
VIDEO
DC15V
GND
