JEI GroupLtd
AIRBEAST 35 ATEX
AIRBEAST 35
ATEX Operator’s Manual
5
1.5. Air preparation unit (optional)
2. SAFETY PRECAUTIONS
1. Before beginning
, read this Operator’s Manual and complete proper occupational
safety and health training.
2. The
machine
must be used only in applications specified in this Operator’s Manual.
3. The
machine
must
be
complete
and
all parts must be genuine and fully operational.
4. The
supply
specifications
must
conform
to
those
specified
on
the
rating
plate.
5. Supply the machine only with clean and lubricated air. The air installation must be
equipped with filter, regulator, and lubricator.
6. Never carry the machine by the motor hose, nor yank the supply hose to
disconnect the connector.
7. Transport
and position the machine using the carrying handle, with the magnet
switch set to position OFF.
8. Untrained bystanders must not be present in the vicinity of the machine.
9. Before beginning, check the condition of the machine and air supply, including the
supply hose, connector, and cutters.
10. Keep the machine dry. Exposing it to rain, snow, or frost is prohibited.
11. Never stay below the machine placed at heights.
12. Keep the work area well lit, clean, and free of obstacles.
13. Mount the annular cutter securely using the set screws. Remove adjusting keys
and wrenches from the work area before connecting the machine to the supply.
14. Never use dull or damaged cutters.
15. Mount and dismount cutters using protective gloves and with the machine
unplugged from the supply.
16. Never use annular cutters without the pilot pin except for establishing incomplete
through holes.
Part number (
filter, regulator, lubricator)
:
ZST-000021
