This document is protected by copyrights.
Copying, using, or distributing without permission of Ansa Group Ltd is prohibited.
2.
SAFETY PRECAUTIONS
1. Before starting, read this
Operator’s Manual and complete proper occupational
safety and health training.
2. Machine must be used only in applications specified
in Operator’s Manual.
3. Machine must be complete and all parts must be genuine and fully operational.
4. Power supply specifications must conform to those specified on rating plate.
5. Power supply socket must be equipped with grounding pin.
6. Never carry machine by cord or yank it to disconnect plug from socket. It may
cause power cord to break and result in electric shock.
7. Untrained bystanders must not be present near machine.
8. Before starting, check condition of machine and electrical installation, including
power cord, plug, control panel components, and milling tools.
9. Keep machine dry. Exposing it to rain, snow, or frost is prohibited.
10. Keep work area well lit, clean, and free of obstacles.
11. Never use machine near flammable fluids or gases, nor in explosive environments.
12. Never use blunt or damaged tools.
13.
Use only tools recommended by manufacturer and specified in Operator’s Manual.
14. Before every use, inspect machine to ensure it is not damaged. Check whether
any part is cracked or improperly fitted. Make sure to maintain proper conditions
that may affect machine operation.
15. Always use safety goggles, hearing protection, gloves, and protective clothing
during operation. Do not wear loose clothing.
16. Do not touch moving parts or metal chips formed during drilling. Prevent objects
from being caught in moving parts.
17. After every use, remove metal chips from machine, particularly from drilling arbor.
Never remove metal chips with bare hands.
18. Maintain machine and tools with care. Cover steel parts with thin grease layer to
protect them against rust when not in use for a longer period.
19. Perform
all
maintenance
work
only
with
power
cord
unplugged
from
power
socket.
20. Perform all repairs only in service center appointed by seller.