manualshive.com logo in svg

JEI DRILLING & CUTTING SOLUTIONS MINIBEAST, Operator'S Manual, Page: 11 / 11

Share
Download
JEI DRILLING & CUTTING SOLUTIONS MINIBEAST Operator'S Manual Download Page 11

WWW.JEIUK.COM

 

 

 

 

 

 

 

 

This document is protected by copyrights. 

Copying, using, or distributing without permission of Ansa Group Ltd is prohibited. 

 

 

 

 

 

5.

 

WARRANTY CARD 

 

WARRANTY CARD No

............. 

 

........................................................................... in the name of Manufacturer warrants 

the  Minibeast  Drilling  Machine  to  be  free  of  defects  in  material  and  workmanship 

under normal use for a period of 12 months from date of sale. 

 

This  warranty  does  not  cover  cutting  tools,  damage  or  wear  that  arise  from 

misuse,  accident,  tempering  or  any  other  causes  not  related  to  defects  in 

workmanship or material. 

 

 

 

Date of production .........................................................................................................  

 

 

Serial number ................................................................................................................  

 

 

Date of sale ...................................................................................................................  

 

 

Signature of seller ..........................................................................................................  

 

 

1.05 / 1 February 2017 

 

 

WE RESERVE THE RIGHT TO MAKE CORRECTIONS 

AND MODIFICATIONS IN THIS MANUAL WITHOUT PRIOR NOTICE 

Summary of Contents for MINIBEAST












Reviews:

No comments