ABM-28
ABM-28
Operator’s Manual
6
1.4. Equipment included
The ABM-28 is supplied in a wooden box with complete standard equipment. The
included equipment consists of:
•
wooden box
– 1 unit
•
carriage mounted on a guide track
– 1 unit
•
additional guide track
– 1 unit
•
clamp
– 2 units
•
track clamp
– 3 units
•
milling unit support for bevelling
at 60° to
–60°
– 1 unit
•
milling unit
– 1 unit
•
chips container
– 1 unit
•
tools container
– 1 unit
•
4 mm hex wrench
– 1 unit
•
5 mm hex wrench
– 1 unit
•
6 mm hex wrench
– 1 unit
•
8 mm hex wrench
– 1 unit
•
13/17 mm flat wrench
– 1 unit
•
screwdriver for securing cutting inserts – 1 unit
•
nut, spring washer, round washer
for mounting milling unit support
– 2 units
•
Operator’s Manual
– 1 unit
1.5. Optional equipment
Name
Number
Milling unit support for bevelling 36-70 mm (1.42
–2.76’’)
plates at 0° to 60° (including facing)
WSP-0518-04-00-00-0
Milling unit support for bevelling 36-70 mm (1.42
–2.76’’)
plates at 0° to
–60°
WSP-0518-05-00-00-0
Clamp for 36-70 mm plates (2 required)
ZCS-0152-15-02-00-0
Track clamp for 36-70 mm plates (3 required)
UST-0152-15-01-00-1
Guide track (one segment)
SGM-0152-04-01-00-2