9.1. Precisely align and carefully press grill into the Velcro fasteners.
The Velcro fastener makes a crackling sound
when it is closed correctly.
9.1. Precisely align and carefully press grill into the Velcro fasteners.
The Velcro fastener makes a crackling sound
when it is closed correctly.
Removing the grills:
The Velcro fasteners stick together very strongly!
The grills can be removed anytime by carefully lifting them off.
Please, avoid any way of forceful yanking at the grills.
It could break!
9.3.
9.2.
Our Tip:
If the panel cannot be pressed on completely at some points. . .
Cause:
the special form at these points and the resulting differences in
material cross section of the grill.
Solution:
the distance can be levelled out with spacers 3 under the
Velcro disc.
(Spacers included with the screw kit)
1. roll down the window completely
2. pull off the plastic caps from the door handle and remove the both
Torx Screws
(A1 u. 2)
underneath
3. carefully push the faceplate of the door latch lever
(B)
out of the catch
4. remove the switch of the rear-view mirror (driver’s side) and the grill
(co-passenger’s side) on the door handle
(C)
and disconnect the cable plugs
5. carefully squeeze the door panel away from the plastic clips at the lower
and lateral edges of the door lining
6. lift the door panel out of the sealing above and simultaneously move it
horizontally and forward away from the inner door metal
7. disconnect the original loudspeaker plugs
1 . Disassembly of the door lining
45146 - BMW 3 E 36 Sedan / Touring
- 3 -
© JEHNERT SOUND DESIGN
45146 - BMW 3 E 36 Sedan / Touring
- 12 -
© JEHNERT SOUND DESIGN
�
9. Installation of the speaker’s grill :
A
1
A
2
B
C
grill
2 self-adhesive Velcro-strip
1 Velcro fastener
3 Washer M4 ø 20 as spacer
doorpanel
