2.
PERSONAL SAFETY PRECAUTIONS
2.1
Wear complete eye protection and protective clothing when working near lead-acid batteries. Always have
someone nearby for help.
2.2
Have plenty of fresh water, soap and baking soda nearby for use, in case battery acid contacts your eyes, skin, or
clothing. Wash immediately with soap and water and seek medical attention.
2.3
If battery acid comes in contact with eyes, flush eyes immediately for a minimum 10 minutes and get medical
attention.
2.4
Neutralize any acid spills thoroughly with baking soda before attempting to clean up.
2.5
Remove all personal metal items from your body, such as rings, bracelets, necklaces and watches. A battery can
produce a short circuit current high enough to weld a ring to metal, causing a severe burn.
2.6
Never smoke or allow a spark or flame in the vicinity of the battery or engine.
2.7 This product contains a lithium ion battery.
In case of fire, you may use water, a foam extinguisher, Halon, CO
2
,
ABC dry chemical, powdered graphite, copper powder or soda (sodium carbonate) to extinguish the fire. Once the
fire is extinguished, douse the product with water, an aqueous-based extinguishing agent, or other nonalcoholic
liquids to cool the product and prevent the battery from re-igniting. NEVER attempt to pick up or move a hot,
smoking, or burning product, as you may be injured.
2.8 NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
1-800-345-4545 jegs.com
