Jegs 88500 Owner'S Manual Download Page 1

Owner’s Manual for 88500 
Lithium Ion Jump Starter 

USB Power Source

 

PLEASE SAVE THIS OWNER’S MANUAL AND READ BEFORE 
EACH USE.

  This manual will explain how to use the jump starter 

safely and effectively. Please read and follow these instructions and 
precautions carefully. 

1. IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

WARNING: RISK OF EXPLOSIVE GASES

WORKING IN THE VICINITY OF A LEAD-ACID BATTERY IS DANGEROUS. BATTERIES GENERATE EXPLOSIVE 
GASES DURING NORMAL OPERATION. IT IS IMPORTANT THAT YOU FOLLOW THESE INSTRUCTIONS EACH 
TIME YOU USE THE UNIT. 

To reduce the risk of battery explosion, follow these instructions and those published by the battery 
manufacturer and the manufacturer of any equipment you intend to use in the vicinity of a battery. Review 
cautionary markings on these products and on the engine. 

WARNING! RISK OF ELECTRIC SHOCK OR FIRE 

1.1 

Keep out of reach of children.  

1.2 

Do not disassemble the jump starter. Take it to a qualified service professional if service or repair is required. 

      Incorrect assembly may result in fire or electrical shock.  

1.3 

Do not use the jump starter to jump a vehicle while charging the internal battery.  

1.4 

Do not recharge the jump starter with a damaged USB cable.  

1.5 

The jump starter gets hot during charging and must have proper ventilation.  

1.6 

Do not set the jump starter on flammable materials, such as carpeting, upholstery, paper, cardboard, etc.  

1.7 

Place the jump starter as far away from the battery being jumped as the cables will permit.  

1.8 

Do not expose the jump starter to rain or snow.  

1.9 

Never attempt to jump start a frozen battery.  

1.10 

Never place the jump starter directly above battery being jumped.  

1.11 

To prevent arcing, never allow the clamps to touch together or to contact the same piece of metal.  

1.12 

Use of an attachment not recommended or sold by the jump starter manufacturer may result in damage to the unit 

        or personal injury.  

1.13 

Never operate the jump starter if it is damaged.  

1.14 

If someone else uses the jump starter, ensure they are well informed on how to use it safely, and have read and 

        understood the operating instructions.  

1.15 

The jump starter is NOT designed to be installed as a replacement for a vehicle battery.  

1.16 

Use ONLY on vehicles, boats and garden tractors powered with a 12V DC battery system.  

1.17 

If the engine fails to start after the recommended number of attempts, disconnect the unit and look for other 

        problems that may need to be corrected.  

1.18 

Use the jump starter for jump starting lead-acid batteries only. Do not use for dry cell batteries that are commonly 

        used with home appliances. 

1-800-345-4545   jegs.com

0099002279-00

Summary of Contents for 88500








Reviews: