Power On Mode
3
The Power On Mode allows you to program the
position of the fuel level gauge pointer when the
vehicle is started.
1. Turn the module power off and wait at least
5 seconds.
2. Program the desired POWER ON mode option
(A or B):
A. To program the module to start at the current
sender position (recommended): Press and
hold the E button (left button) and turn the
module power on. Release the E button.
B. To program the module to start at the
set the POWER ON position
• Adjust the calibration screw to the position
you would like the fuel level gauge pointer
to be positioned when the car is started
(this is typically to the left of the gauge
Empty position). Press the E and F
buttons simultaneously one time to save
the POWER ON position.
• Press and hold the H button (middle button)
and turn the module power on. Release the
H button.
3. Green LED will turn on once POWER ON mode
option has been selected.
