Jefferson OLYMPUS JEFGENPET63EL, User Manual

Page: 7 / 16

7
USER MANUAL
7.9kVA Petrol Generator
JEFGENPET63EL
www.jeffersontools.com
10. Troubleshooting
Symptom Possible Cause Action
Engine won't start
Not enough fuel oil Add fuel - see section "4. Checking Generator Prior to
Use"
Fuel nozzle cannot inject fuel or there is not
enough fuel
Repair the fuel injector
The speed control lever is not in the "Run"
position
Move the lever to the "Run" position
Lubricant oil level is too low Check that the oil level is topped up and sits between the
upper and lower level markers
Not enough speed or force used on the
starter/recoil handle
See section "5. Starting the Generator"
The fuel nozzle is blocked or dirty Clean tthe fuel nozzle
Generator fault
Circuit breaker is not closed Turn the circuit breaker to the "On" position
Poor or faulty socket connection Adjust the socket feet
The rated generator speed cannot be obtained Adjust to rated speed
Carbon brush is faulty or worn Replace the carbon brush
AVR is depreciated Replace the AVR
11. Technical Specification
Noise Level Information
The figures quoted in this table are
emission (sound power) levels and are not
necessarily safe working levels.
Whilst there is a correlation between
the emission and exposure levels, this can
not be used reliably to determine whether
or not further precautions are required.
Factors that influence the actual level of
exposure to the work-force include the
characteristics of the work room, the
other sources of noise, the number of
machines and other adjacent processes,
and the length of time for which an
operator is exposed to the noise. Also
the permissible exposure level can vary
between regions.
This information, however, will allow the
user of the machine to make a better
evaluation of the hazard and risk.