Jefferson OLYMPUS JEFGENPET63EL, User Manual

Page: 5 / 16

5
USER MANUAL
7.9kVA Petrol Generator
JEFGENPET63EL
www.jeffersontools.com
7. Stopping the Generator
1. Before stopping the generator, allow it to run for approximately 3 minutes with no consumers so that it can "cool
down".
2. Turn off the circuit breaker.
3. Turn the key/ignition switch to the "OFF" position.
4 . Turn the fuel cock lever to the "CLOSED" position.
8. Transportation and Storage
• When transporting the generator, ensure the starting switch is set to the "OFF" position and that the fuel valve is
set to the "Closed" position.
• Keep the generator level to prevent fuel spillage. Fuel vapour or spilled fuel may ignite. Touching a hot engine can
cause serious burns or fires.
• Let the engine cool before transporting or storing the generator.
• Make sure not to drop or strike the generator when transporting. Do not place heavy objects on top of the
generator during transit, storage or operation.
6. Connecting Consumers to the Generator
1. Connect the machine you want to use to the AC socket. Note: Do not exceed the specified load limit of the
specified maximum AC output.
2. Do not connect the generator to the household network as this may result in damage to the generator itself or to
other electrical appliances in your home
.
9. Operation Environment
• This unit can generate rated output under the following conditions:
• The Generator should work in low output under the following conditions:
Altitude Ambient Temperature Relative Humidty
0m +20º 60%
Altitude Ambient Temperature Relative Humidty
>1000m >40
º
90%