6
USER MANUAL
1/2" Air Impact Wrench
JEFIW7733
3. Connectivity
Air Supply & Pressure
•
Always use a clean and dry air supply to operate the tool at 90 PSIG-6.2 bar.
• To ensure operating safety, performance and prevent damage to the tool do not operate exceed the maximum working air pressure.
Air Line
•
Use a fitting air hose for connection between the compressor & tools.
• Ensure that
the compressed air is cooled and its water content filtered and lubricated as required as shown in
Fig 1
below.
• Excessive moisture levels can
be compressed in the pipe and can permeate into tools & equipment resulting in mechanical failures and pos-
sible injury.
Air Hose
• Ensure all hoses and fittings are clean and free of dust and debris before connecting any tools and equipment.
•
Dust and debris can cause rust and malfunction in the tools and can result in dangerous operation.
Fig 1
.
Connectivity Example
