8
USER MANUAL
JEFHTG2S-230
2000W HEAT GUN
www.jeffersontools.com
Attention! Before performing any work on the equipment, pull the power plug.
Maintenance
Your Power Tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool care and regular cleaning.
Lubrication
Your power tool requires no additional lubrication.
Cleaning
•
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
•
Regularly clean the machine housing with a soft cloth, preferably after each use.
•
Keep the ventilation slots free from dust and dirt.
•
If the dirt does not come off use a soft cloth moistened with soapy water.
•
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may damage the plastic parts.
6. Maintenance & Troubleshooting
The air temperature can be adjusted to suit a wide range of applications. The table below suggests settings for different
applications.
[I] Low Setting Applications:
•
Drying paint, varnish color shade samples, filler, adhesives, construction joints and stucco forms
•
Drying wet timber prior to filling
•
Removing stickers
•
Joining adhesives-Large-surface gluing with contact adhesives, activation of pressure-sensitive adhesives, acceleration of
bonding processes, releasing of bonding points as well as releasing or bonding of edge band or veneer.
•
Waxing and de-waxing
•
Shrinking PVC wrapping and insulation tubes
•
Defrosting of icy stairs and steps, door locks, trunk lids, car doors or water pipes, as well as for defrosting refrigerators and
ice boxes
[II] High Setting Applications:
•
Welding of thermoplastic polymer, flooring materials of PVC and linoleum, PVC-coated fabric, tarpaulins and foils
•
Bending plastic pipes and sheets
•
Soldering plumbing joints, tin, special silver solder, SMD elements, cable lugs
•
Loosening rusted or tightly fastened nuts and bolts
•
Removing old and even thick coatings of oil paint , lacquer, varnish and synthetic plaster
•
Disinfection-With hot air of 600°, you can quickly rid animal sties/stables of bacteria .Woodworm infestation can be controlled
(Caution: Danger of fire! Do not heat up the wooden surface excessively).
5. Applications
