5
USER MANUAL
v1.1
JEFBLTSND075-230
•
JEFBLTSND150-230
•
JEFBLTSND150-400
BELT LINISHER
www.jeffersontools.com
SAFETY GUIDELINES
Please read and ensure that you understand all of the operating instructions, safety
precautions and warnings in this Instruction Manual before operating or maintaining this
equipment. An accident can often be avoided by recognizing a potentially hazardous
situation before it occurs, and by observing the appropriate safety procedures. Never use
this equipment or modify it in any way that has not been specifically recommended by the
manufacturer. Contact a qualified electrician for advice on any issues relating to electrical
safety in your working environment.
GENERAL EQUIPMENT SAFETY
This machine is equipped with various safety devices protecting both the operator and the machine. These features
cannot cover all aspects relating to safety, therefore the user should read all of the following safety guidelines
carefully before operating this machine. Other safety concerns relating to the surrounding conditions and material
should also be carefully considered before beginning to operate this machine.
•
Before connecting the machine to the main power supply, ensure that all safety items are in their active positions
and fully functional. Before removing the doors or protective safety covers, turn off the switch and disconnect the
plug from its socket.
•
Ensure that the kick-back catchers are moving freely and regularly check they are functioning as required
throughout the day.
•
Do not connect the machine to the mains while the door or protective cover is removed.
•
Before operating the machine familiarise yourself with the location of all of the switches, paying particular
attention to the location of the emergency stop switch so that you can use it promptly at any time.
•
Do not touch any switches while the machine is being operated.
•
Do not under any circumstances touch any rotating tool by hands or with any other objects.
•
When not in use, turn off the machine using the off switch and disconnect the plug from the mains power supply.
•
Before cleaning the machine, switch off the machine and disconnect the plug from the mains power supply.
•
Before carrying out any maintenance work on the machine, switch off the machine and disconnect the plug from
the mains power supply.
•
Should a failure in power supply occur, switch off the machine immediately.
•
Do not alter the machine in any manner which might cause any risk to its safe operation.
•
Do not paint, cause any damage to, alter or remove safety plates. If they become illegible or is damaged, please
contact the manufacturing plant and renew the plates.
•
Keep work area clear around the machine. Cluttered areas can cause accidents and injuries.
•
Remove personal articles, e.g. rings, watches, bracelets, neckties etc before working on the machine. Never
wear any loose working clothes, button sleeves of shirts remove any neck ties, which may be caught with various
parts of the working machine. Wear hair protection and fasten hair properly to avoid catching by moving part.
•
Always wear the appropriate protective clothing including safety glasses, face shield, dust mask, earplugs,
safety boots and leather apron, as required.
•
Always wear a protective mask while machining any material that produces dust while being machined.
•
Do not work on the machine under the influence of drugs or alcohol, or if you are tired.
WARNING:
No responsibility is accepted for incorrect use of this equipment. Incorrect use can result in damage to the equipment
and danger to the user. Warranty will be void in the event of incorrect use. The warnings, cautions and instructions
discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which cannot be built into this product, but must
be supplied by the operator.
