USER GUIDE
v1.2
10W LED Worklight 230V - 700 Lumens
JEFWLT10W-230
Specifications
Assembly
1.
Attach the lamp head to the bracket by threading a washer on each of the angle fixing bolts.
2.
Insert the bolts through the holes on each side of the bracket then into the side holes
located on the lamp head brackets.
3.
Hand tighten the bolts until fixed firmly.
4.
Attach the lamp head assembly to the stand and thread the remaining bolt through the
threaded hole in the stand and tighten up by hand until fixed firmly.
•
Do not submerge this equipment in liquids
•
Avoid pointing the light source directly at the eyes
•
Check equipment for wear or damage before use
•
Do not modify the equipment or use for purposes other than those it was designed
•
Store in a cool dry environment, keep away from children
Handling & Storage
Voltage:
Input Power / Chip:
Luminosity:
Colour Temperature:
Cable / Plug:
Ingress Protection (Housing):
230V
10W / 30mil Epistar LED Chip
700 Lumens
6500k
1.8M / 3A Plug
IP65