JEFF ROWLAND CORUS, Operational Manual

Page: 19 / 22

REMOTE TRANSMITTER BATTERY REPLACEMENT
The
CORUS PREAMPLIFIER
’s handheld remote transmitter is powered by 2 standard
alkaline double-A (AA) batteries. When the remote transmission range decreases or no
longer operates, the batteries need to be replaced.
 Using a standard flat blade screw driver, unfasten the holding screw located in
the bottom end of the transmitter unit.
 Remove the spring-loaded cover.
 Remove both AA batteries.
 Orient the remote transmitter with the keypad facing up, and with the battery
compartment towards you.
 Insert a fresh battery into the left barrel with negative pole (flat end) first.
 Insert a fresh battery into the right barrel with positive pole (button end) first.
 Install the spring-loaded cover.
 Gently refasten the holding screw. Do not over-tighten.
19