JEFF ROWLAND CORUS, Operational Manual

Page: 18 / 22

REMOTE TRANSMITTER CONTROLS

BUTTONS 1 THROUGH 6.
Selects the Main Input number. If front panel
RECORD
button is pressed, or the
RECORD SELECT
menu option is selected, the handheld
remote buttons #1 through #6 will select the Record Input Number.

PHASE.
Toggles between Phase Normal (L+ +R) and Invert Both (L
− −
R).

MUTE.
The
CORUS PREAMPLIFIER
’s mute function can be controlled by pressing
the dedicated
MUTE
button featured on the handheld remote transmitter.

/ − .
Normally adjusts the Main Input volume. In
RECORD OUT LEVEL
mode it adjusts the record volume.

OUT 2 VOL +/ − .
Adjusts the level of the unbalanced RCA main outputs relative to
the balanced Main Out 1 outputs (XLR/RCA), and Main Output 2 XLR output.
Press
ENTER
or
EXIT
to leave this mode.
 REC OUT / − .
Pressing either button automatically enters the
REC OUT
LEVEL
menu mode and then adjusts the level of the
RECORD
outputs (XLR/RCA).
Press
ENTER
or
EXIT
to leave this mode.

UP-DOWN ARROWS. 
/ 
.
In
MENU
mode scrolls the menu text up or down.

LEFT RIGHT ARROWS.
 /  In the
BALANCE
menu mode - shifts the outputs to
the left or right. In the
INPUT OFFSET
or
OUT 2 OFFSET
menu modes - adjusts the
input gain offset up or down.

ENTER.
Performs the same function as the front panel’s
MENU
button.

EXIT.
Exits any
MENU
function.
INTERNAL SWITCHES
Selects the Remote Frequency (custom code) that is transmitted.
 All Switches OFF: The Default Remote Code
 Switch 1 ON: Remote Code 1.
 Switch 2 ON: Remote Code 2.
 Switch 3 ON: Remote Code 3.
 Switch 4 ON: Enables blinking “finder” LED.
18