REAR PANEL
Figure 2:
Rear Panel
1. AC MAINS INPUT CONNECTOR.
Install the AC Power Cable into the AC input connector between
the amplifier and your AC mains outlet..
2. INPUTS.
Two (2) pair Balanced (XLR).
3. LOUDSPEAKER OUTPUTS. Unscrew the knob that secures the speaker output connectors on both
the
L SPEAKER OUTPUT
and the
R SPEAKER OUTPUT
and pull the securing block out far enough to
allow access to the binding posts. Install the positive (usually red) loudspeaker cable spade terminal
to the positive (+) binding post and the negative (usually black) spade terminal to the negative (–)
binding post of either horizontally or vertically oriented
LEFT
and
RIGHT CHANNELS
. Secure the
loudspeaker connections by tightening the knob securely with your fingers.
4. REMOTE ON/OFF. A 1/8” (3.5 mm) mini-plug connector is provided on the rear panel of the
MODEL
625 STEREO AMPLIFIER
for remotely switching the amplifier between Operational and Standby
modes. When connected to another component with the proper circuitry, the amplifier standby
function can be turned
ON
and
OFF
remotely.
PAGE 11
