Jeep Wrangler 2011 Owner'S Manual Download Page 142

Page: 142 / 603

Rotate the entire seat assembly toward the instrument
panel.

Passenger Seat

In addition to Easy Entry, the front passenger seat is also
equipped with Tip n’ Slide. This feature allows for easier
entry for rear passengers.

Pull upward on the recline lever and slide the entire seat
forward (Easy Entry).

With the seat forward, pull the entire seat assembly
toward the instrument panel.

Tip n’ Slide

Easy Entry Lever

140

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for Wrangler 2011




























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Wrangler 2011

Reviews:

Brands by name

Popular brands

Jeep Wrangler 2011, Owner'S Manual

Search results

Summary of Contents for Wrangler 2011

Reviews:

Brands by name

Popular brands