Jeep Wrangler 2011 Owner'S Manual Download

Page: 174 / 603

NOTE:

To aid in disconnecting the knuckles, you may

carefully tap on the knuckles using a rubber mallet.

5. Unzip the zipper on the sport bar cover to expose the
pivot brackets. Remove the brackets using a #T30 Torx

威

head driver. Recover and re-zip the sports bar cover.
Store the pivot brackets and screws in a safe place.

6. Reinstall the hard top. Refer to “Freedom Top Three-
Piece Modular Hard Top — Front/Rear Panel Installa-
tion” in this section.

172

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for Wrangler 2011




























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Wrangler 2011

Reviews:

Related manuals for Wrangler 2011

Brands by name

Popular brands

Jeep Wrangler 2011, Owner'S Manual

Search results

Summary of Contents for Wrangler 2011

Reviews:

Related manuals for Wrangler 2011

Brands by name

Popular brands