Jeep Uconnect, User Manual, Page: 92 / 108

To set the password, activate the DVD Setup Menu and
follow these additional instructions:
•
Using the remote control Left and Right cursor but-
tons, select the Rating tab.
•
Highlight
⬙
Change Password
⬙
, and then press the
remote control’s ENTER button.
•
Enter the current password. Select a digit, use the
remote control Up and Down cursor buttons to set the
value for the current digit, and then press the remote
control’s Right cursor button to select the next digit.
Repeat this digit selection sequence for all four digits.
•
After the four-digit password is entered, press the
remote control’s ENTER button. If the password is
correct, the set password screen is displayed.
•
Using the remote control’s Up and Down cursor
buttons to set the value for the current digit and the
remote control’s Right cursor button to select digits,
enter the new password.
•
After the four-digit password is entered, press the
remote control’s ENTER button to accept the change.
DVD Player Level Menu
90 Uconnect™ Multimedia - Video Entertainment System (VES)™