Jeep Grand Cherokee SRT 2014, User Manual

Page: 92 / 172

Changing The Volume
• Start a dialogue by pressing the Phone button , then say a command for
example - "Help".
• Use the radio ON/OFF VOLUME rotary knob to adjust the volume to a comfortable
level while the Uconnect
®
system is speaking. Please note the volume setting for
Uconnect ® is different than the audio system.
NOTE:
To access help, press the Uconnect
®
Phone button on the steering wheel and
say "help." Touch the display or push either or button and say "cancel"
to cancel the help session.
Voice Text Reply
• Uconnect
®
Phone can read or send new text messages on your mobile phone.
• Your mobile phone must support SMS over Bluetooth ® in order to use this feature.
If the Uconnect
®
Phone determines your phone is not compatible with SMS
messaging over Bluetooth ® the “Messaging” button will be greyed out and the
feature will not be available for use.
NOTE:
• For mobile phone compatibility and pairing instructions, please visit
www.UconnectPhone.com
WARNING!
• Any voice commanded system should be used only in safe driving conditions
following applicable laws regarding phone use. Your attention should be
focused on safely operating the vehicle. Failure to do so may result in a
collision causing you and others to be severely injured or killed.
• In an emergency, to use Uconnect
®
Phone, your mobile phone must be:
• turned on,
• paired to Uconnect
®
Phone,
• and have network coverage.
VOICE COMMAND QUICK REFERENCE
Uconnect
®
8.4AN Voice Command Quick Reference
• If the Uconnect
®
Voice Command button exists on your steering wheel, you
have the Voice Command feature, which is optimized for the driver. The Voice
Command feature lets you keep your hands on the wheel, and your eyes on the road.
• When you press the Voice Command button located on the steering wheel,
you will hear a beep. After the beep, give your command. If you do not know what
commands to say, you can say “help” and the system will provide options to you.
If you ever wish to interrupt the system while it lists options, press the Voice
Command
button, after the beep, say your command.
ELECTRONICS
90