Jeep Grand Cherokee SRT 2014, User Manual

Page: 116 / 172

0-60 mph (0-100 km/h)
• When selected, this screen displays the time it takes for the vehicle to go from 0
to 60 mph (0 to 100 km/h) within 10 seconds.
Braking Distance
• When selected, this screen displays the vehicle's braking distance and the speed
at which the brake pedal was depressed.
1/8 Mile, 1/4 Mile
• When selected, this screen displays the time it takes the vehicle to travel 1/8 mile
(1/4 mile) within 30 seconds and the vehicle's speed when it reaches 1/8 mile
(1/4 mile).
Instantaneous G-Force
• When selected, this screen displays the current G-Force (lateral and longitudinal)
along with a friction circle that displays the directions of the forces.
Peak G-Force
• When selected, this screen displays all four G-Force values (two lateral and two
longitudinal).
Digital Speedometer
• When selected, this screen displays vehicle speed and records top speed.
WARNING!
Measurement of vehicle statistics with the Performance Features is intended for
off-highway or off-road use only and should not be done on any public roadways.
It is recommended that these features be used in a controlled environment and
within the limits of the law. The capabilities of the vehicle as measured by the
performance pages must never be exploited in a reckless or dangerous manner,
which can jeopardize the user’s safety or the safety of others. Only a safe,
attentive, and skillful driver can prevent accidents.
Uconnect® SRT8 Performance Features
• To access the SRT8 Performance Features, touch the “Apps” soft-key then touch
the “SRT” soft-key. Press the UP or DOWN soft-key to cycle through the features.
Press the feature soft-key to select that feature.
• The Performance Page include the following:
• Timers • 1/8 Mile
•
Engine Values
•
1/4 Mile
•
Digital Gauge Displays
•
Instantaneous G-Force
•
0-60 mph (0-100 km/h)
•
Peak G-Force
•
Braking Distance
•
Digital Speedometer
SRT8
114