Jeep GRAND CHEROKEE L 2021 Owner'S Manual Download Page 181

Page: 181 / 388

STARTING AND OPERATING

179

4. Measure the height from the top of the front

wheel opening on the fender to ground; this is

height H1.

Measuring Height (H)

5. Attach the trailer to the vehicle without the

weight distribution bars connected.

6. Measure the height from the top of the front

wheel opening on the fender to the ground;

this is height H2.

7. Install and adjust the tension in the weight

distributing bars per the manufacturer’s

recommendations so that the height of the

front fender is approximately (H2-H1)/2+H1

(about 1/2 the difference between H2 and H1

above Normal Ride Height [H1]).

8. Use the touchscreen radio settings and switch

off Tire/Jack mode. Make sure the truck

returns to Normal Ride Height. Perform a

visual inspection of the trailer and

weight-distributing hitch to confirm the

manufacturers’ recommendations have been

met.

9. The vehicle can now be driven.

RAILER

ITCH

LASSIFICATION

The following chart provides the industry standard

for the maximum trailer weight a given trailer hitch

class can tow and should be used to assist you in

selecting the correct trailer hitch for your intended

towing condition.

Measurement

Example

Example Height (mm)

925

946

H2-H1

(H2-H1)/2

10.5

(H2-H1)/2 + H1

935.5

Trailer Hitch Classification Definitions

Class

Max. Trailer Hitch Industry Standards

Class I - Light Duty

2,000 lb (907 kg)

Class II - Medium Duty

3,500 lb (1,587 kg)

Class III - Heavy Duty

6,000 lb (2,722 kg)

Class IV - Extra Heavy Duty

10,000 lb (4,535 kg)

Refer to the “Trailer Towing Weights (Maximum Trailer Weight Ratings)” chart for the Maximum Gross Trailer Weight (GTW) towable for your given drivetrain.
All trailer hitches should be professionally installed on your vehicle.

21_WL_OM_EN_USC_t.book Page 179

Summary of Contents for GRAND CHEROKEE L 2021





































































































































































































































































































































































































Search results

Summary of Contents for GRAND CHEROKEE L 2021

Reviews:

Related manuals for GRAND CHEROKEE L 2021

Brands by name

Popular brands

Jeep GRAND CHEROKEE L 2021, Owner'S Manual

Search results

Summary of Contents for GRAND CHEROKEE L 2021

Reviews:

Related manuals for GRAND CHEROKEE L 2021

Brands by name

Popular brands