Jeep Compass, Information Manual

Page: 146 / 189

SERVICING AND MAINTENANCE 145
Replacing Exterior Bulbs
Turn Signal Light
To replace the bulbs proceed as follows:
1. Open hood.
2. Remove the cover over the head lamps.
3. Remove the electrical connectors.
4. For the turn signal bulb, rotate in a counter -
clockwise direction and remove the bulb
and bulb socket. Pull the bulb axially to
remove it from the socket.
5. Install the bulb and sockets and rotate them
clockwise making sure that it is properly
locked.
6. Reconnect the electrical connectors.
7. Reinstall cover over the head lamps.
NOTE:
It is advised referring to an authorized dealer for
service.
Rear Body Side Tail Lamps
Contain the following:

Position lights

Stop lights

Direction indicator
Center High Mounted Stop Lamp (CHMSL) LED (Serviced at an authorized dealer)
License Plate Lamp LED (Serviced at an authorized dealer)
Liftgate Lamp Reverse W21WLL
Liftgate Lamp Tail LED (Serviced at an authorized dealer)
Exterior Bulbs
Lamps Bulb Number
21_M6_EIG_EN_IN_t.book Page 145