Jeep Commander, Owner'S Manual, Page: 221 / 519

SEEK Buttons
Press and release the SEEK buttons to search for the next
listenable station in AM/FM mode. Press the right switch
to seek up and the left switch to seek down. The radio
will remain tuned to the new station until you make
another selection. Holding either button will bypass
stations without stopping until you release it.
SCAN Button
Pressing the SCAN button causes the tuner to search for
the next listenable station in AM, FM or Satellite (if
equipped) frequencies, pausing for five seconds at each
listenable station before continuing to the next. To stop
the search, press the SCAN button a second time.
Voice Recognition Button (UConnect
威
Hands-Free
Phone) — If Equipped
Press this button to operate the Hands-Free Phone
(UConnect
威
) feature (if equipped). Refer to “Hands-Free
Communication (UConnect
威
)” in Section 3.
If your vehicle is not equipped with or this feature is not
available on your vehicle, a “Not Equipped With
UConnect” message will display on the radio screen.
Phone Button (UConnect
威
Hands-Free Phone) — If
Equipped
Press this button to operate the Hands-Free Phone
(UConnect
威
) feature (if equipped). Refer to “Hands-Free
Communication (UConnect
威
)” in Section 3.
If your vehicle is not equipped with or this feature is not
available on your vehicle, a “Not Equipped With
UConnect” message will display on the radio screen.
TIME Button
Press the TIME button to alternate locations of the time
and frequency display.
UNDERSTANDING YOUR INSTRUMENT PANEL 219
4