Chapter
Body
11-13
10 Remove the window glass
it
t o detach the stud, then
solenoid (see illustration). On power door locks, it will be necessary
sliding the glass up and out of the door.
t o drill out the rivets retaining the solenoid t o the door.
1 1 lnstallation is the reverse of removal. Tighten the stationary glass
5
lnstallation is the reverse
of
removal. Tighten the door latch
frame screws and stud nut securely.
ing screws securely.
19
Door latch, lock cylinder and handle
-
removal
and installation
Refer to illustrations
19.3,
19.4,
19.6
and
19.8
Lock cylinder
6
Disconnect the link from the lock cylinder (see illustration).
7
Use pliers t o slide the retaining clip off and remove the lock cylinder
from the door. lnstallation is the reverse of removal. After installation,
check the latch link
by pressing the door handle release button
in. Check that the latch link starts to move after the button moves about
1
Remove the door trim panel and watershield (see Section
12).
1164-inch. If necessary, loosen the adjusting screw on the latch, adjust
2
Remove the door window glass (see Section 18).
the
and then retighten it.
Door latch
Handle
3
Remove the access plug (if equipped) in the end of the door (see
8
Remove the retaining nuts, pull the handle out, detach the control
illustration).
rod and remove the handle from the door (see illustration).
4
Remove the three door latch retaining screws from the end of the
9
lnstallation is the reverse of removal. Tighten the retaining nuts
door, disconnect the links, then remove the latch and (if equipped)
securely.
19.3
On some models it is necessary
t o pry out the plug i n the end of the
door for access t o the door handle
19.6
Lock cylinder installation details
19.4
Door latch and lock details
I
Latch retaining screws
2
Latch assembly
3
Power lock solenoid
4
Lock cylinder and clip
19.8
Remove the retaining nuts
pull the handle
then detach the control rod
The Motor Manual Guy
Summary of Contents for cherokee 1989
