Jeep 2020 RENEGADE, Owner'S Manual

Page: 179 / 484

STARTING AND OPERATING 177
Speed Control Buttons
NOTE:

In order to ensure proper operation, the
Speed Control System has been designed to
shut down if multiple Speed Control func -
tions are operated at the same time. If this
occurs, the Speed Control System can be
reactivated by pushing the Speed Control on/
off button and resetting the desired vehicle
set speed.

The Speed Control function will not work in
4WD Low Range.
Activation
Push the on/off button to activate the Speed
Control. The Cruise Indicator Light in the
instrument cluster display will illuminate. To
turn the system off, push the on/off button a
second time. The Cruise Indicator Light will turn
off. The system should be turned off when not in
use.
Setting A Desired Speed
Turn the Speed Control on.
NOTE:
The vehicle should be traveling at a steady
speed and on level ground before pushing the
SET (+) or SET (-) button.
When the vehicle has reached the desired
speed, push the SET (+) or SET (-) button and
release. Release the accelerator and the
vehicle will operate at the selected speed.
Varying The Speed
To Increase Speed
When the Speed Control is set, you can increase
speed by pushing the SET (+) button.
The driver’s preferred units can be selected
through the instrument panel settings. Refer to
“Instrument Cluster Display” in “Getting To
Know Your Instrument Panel” for more
information. The speed increment shown is
dependent on the chosen speed unit of U.S.
(mph) or Metric (km/h):
U.S. Speed (mph)

Pushing the SET (+) button once will result in
a 1 mph increase in set speed. Each subse -
quent tap of the button results in an increase
of 1 mph.

If the button is continually pushed, the set
speed will continue to increase until the
button is released, then the new set speed
will be established.
1 — On/Off
2 — SET (+)/Accel
3 — RES/Resume
4 — SET (-)/Decel
5 — CANC/Cancel
WARNING!
Leaving the Speed Control system on when
not in use is dangerous. You could acciden -
tally set the system or cause it to go faster
than you want. You could lose control and
have an accident. Always leave the system off
when you are not using it.
5
20_BV_OM_EN_USC_t.book Page 177