Jeep 2011 Wrangler Unlimited, User Manual

Page: 54 / 88

RECREATIONAL TOWING
(BEHIND MOTORHOME)
Towing - Two-Wheel Drive
Models
• Recreational towing with all four
wheels on the ground is allowed
ONLY if the rear driveshaft is
removed. See your authorized
dealer or refer to the Service
Manual. Towing with the rear
wheels on the ground while the
driveshaft is connected can result
in severe transmission damage.
• The parking brake must be firmly
engaged and the wheels chocked
during driveshaft removal and
installation. The parking brake must
remain engaged unless the vehicle
is securely and properly connected
to the tow vehicle, or the driveshaft
is completely reinstalled. See your
authorized dealer for proper
driveshaft removal and reinstallation
procedures, including flange
orientation/alignment, use of
thread-locking compound, proper
bolt torque specifications, etc.
Towing - Four-Wheel Drive
Models
• Turn off engine and depress brake
pedal.
• Shift automatic transmission into
NEUTRAL or depress clutch pedal
on manual transmission.
• Shift transfer case to N (Neutral).
• Start the engine, shift into drive or
1st gear and ensure there is no
vehicle movement.
• Shut off the engine, place ignition
into ACC position and shift
automatic transmission into PARK,
manual transmission into
NEUTRAL.
• Apply the parking brake, attach
vehicle to tow vehicle and release
the parking brake.
• Disconnect negative battery cable.
• Refer to your Owner's Manual on
the DVD for further details.
WARNING!
If the driveshaft is removed, the
vehicle can roll even if the
transmission is in PARK, which could
cause serious injury or death.
UTILITY
52