Jeep 2010 Wrangler Owner'S Manual Download | Manualshive

Page: 40 / 554

background image

ejection and the risk of injury caused by striking the
inside of the vehicle.

Everyone in a motor vehicle should

be belted at all times.

Lap/Shoulder Belts

All seating positions in your vehicle are equipped with
lap/shoulder belts. The belt webbing retractor is de-
signed to lock during very sudden stops or collisions.
This feature allows the shoulder part of the belt to move
freely with you under normal conditions. However, in a
collision the belt will lock and reduce the risk of you
striking the inside of the vehicle or being thrown out.

WARNING!

•

It is dangerous to ride in a cargo area, inside or
outside of a vehicle. In a collision, people riding in
these areas are more likely to be seriously injured
or killed.

(Continued)

WARNING! (Continued)

•

Do not allow people to ride in any area of your
vehicle that is not equipped with seats and seat
belts.

•

Be sure everyone in your vehicle is in a seat using
a seat belt properly.

•

Wearing a seat belt incorrectly is dangerous. Seat
belts are designed to go around the large bones of
your body. These are the strongest parts of your
body and take the forces of a collision the best.
Wearing your belt in the wrong place could make
your injuries in a collision much worse. You might
suffer internal injuries, or you could even slide out
of part of the belt. Follow these instructions to
wear your seat belt safely and to keep your pas-
sengers safe, too.

(Continued)

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

39

«
...
38
39
40
41
42
...
»

Summary of Contents for 2010 Wrangler











































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2010 Wrangler

Brand: Jetter Pages: 4

Brand: K&K Pages: 8

Brand: K&K Pages: 20

Brand: K&K Pages: 6

Brand: K&K Pages: 3

Brand: K&K Pages: 3

Brand: Taffio Pages: 8

Brand: Ford Pages: 2

Green Motion DC 66

Brand: Eaton Pages: 18

Brand: Cadillac Pages: 20

Brand: Pyle Pages: 8

Jumpy Miltispace

Brand: CITROËN Pages: 164

Brand: Directed Pages: 30

Brand: Saab Pages: 288

Brand: Yenkee Pages: 22

Brand: Chevrolet Pages: 376

Brand: NavLinkz Pages: 24

SKT 170 HYUNDAI

Brand: Paser Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands