Jeep 2009 Patriot Owner'S Manual Download Page 96

Page: 96 / 457

UConnect

姞

System Features

Language Selection
To change the language that the UConnect

威

system is

using:

•

Press the PHONE button to begin.

•

After the

⬙

Ready

⬙

prompt and the following beep, say

the name of the language you wish to switch to
English, Espanol, or Francais.

•

Continue to follow the system prompts to complete
the language selection.

After selecting one of the languages, all prompts and
voice commands will be in that language.

NOTE:

After every UConnect

威

language change opera-

tion, only the language-specific 32-name phonebook is
usable. The paired phone name is not language-specific
and usable across all languages.

Emergency Assistance
If you are in an emergency and the mobile phone is
reachable:

•

Pick up the phone and manually dial the emergency
number for your area.

If the phone is not reachable and the UConnect

威

system

is operational, you may reach the emergency number as
follows:

•

Press the PHONE button to begin.

•

After the

⬙

Ready

⬙

prompt and the following beep, say

⬙

Emergency

⬙

and the UConnect

威

system will instruct

the paired cellular phone to call the emergency num-
ber. This feature is supported in the U.S., Canada, and
Mexico.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2009 Patriot










































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 Patriot

Reviews:

Jeep 2009 Patriot, Owner'S Manual, Page: 96 / 457

Search results

Summary of Contents for 2009 Patriot

Reviews: