Jeep 2009 Patriot Owner'S Manual Download Page 36 | Manualshive

Page: 36 / 457

Jeep 2009 Patriot Owner'S Manual Download Page 36

Window Lockout Switch

The window lockout switch on the driver’s door allows
you to disable the window control on the other doors. To
disable the window controls on the other doors, press the
window LOCKOUT switch. To enable the window con-
trols, press the window LOCKOUT switch a second time.

LIFTGATE

NOTE:

The key that is used to start the vehicle is also

used to lock or unlock the doors and open the liftgate.

To unlock the liftgate, insert the key into the lock and
turn to the right (manual lock models only). The liftgate
can also be unlocked using the Remote Keyless Entry
(RKE) transmitter or by activating the power door lock
switches located on the front doors. The central locking/
unlocking feature (if equipped) can also be activated
from the liftgate key cylinder.

Once unlocked, the liftgate can be opened or closed
without using the key. To open the liftgate, squeeze the
liftgate release and pull the liftgate open with one fluid
motion.

Window Lockout Switch

34

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
34
35
36
37
38
...
»

Summary of Contents for 2009 Patriot










































































































































































































































































































































































































































































Reviews:

No comments