Jeep 2008 Commander Page 87 Owner'S Manual Download

Page: 87 / 493

Voice Recognition Button

Actual button location may vary with radio.
The individual buttons are described in the
“Operation” section.

The UConnect

system can be used with any Hands-Free

Profile certified Bluetooth

cellular phone. See the

UConnect

website for supported phones. If your cellu-

lar phone supports a different profile (e.g., Headset
Profile) you may not be able to use any UConnect

features. Refer to your cellular service provider or the
phone manufacturer for details.

The UConnect

system is fully integrated with the vehi-

cle’s audio system. The volume of the UConnect

system

can be adjusted either from the radio volume control
knob or from the steering wheel radio control (right
switch), if so equipped.

The radio display will be used for visual prompts from
the UConnect

system such as

CELL

or caller ID on

certain radios.

Operation

Voice commands can be used to operate the UConnect

system and to navigate through the UConnect

structure. Voice commands are required after most
UConnect

system prompts. You will be prompted for a

specific command and then guided through the available
options.

•

Prior to giving a voice command, one must wait for
the beep, which follows the

Ready

prompt or another

prompt.

•

For certain operations, compound commands can be
used. For example, instead of saying

Setup

and then

Phone Pairing,

the following compound command

can be said:

Setup Phone Pairing.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2008 Commander














































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Commander

Reviews:

Related manuals for 2008 Commander

Brands by name

Popular brands

Jeep 2008 Commander, Owner'S Manual

Search results

Summary of Contents for 2008 Commander

Reviews:

Related manuals for 2008 Commander

Brands by name

Popular brands