Jeep 2008 Commander, Owner'S Manual, Page: 100 / 493

NOTE:
•
You may not hear all of the tones due to cellular phone
network configurations; this is normal.
•
Some paging and voice mail systems have system time
out settings that are too short and may not allow the
use of this feature.
Barge In - Overriding Prompts
The “Voice Recognition” button can be used when you
wish to skip part of a prompt and issue your voice
recognition command immediately. For example, if a
prompt is asking
9
Would you like to pair a phone, clear
a
{
,
9
you could press the “Voice Recognition” button and
say,
9
Pair a Phone
9
to select that option without having to
listen to the rest of the voice prompt.
Turning Confirmation Prompts On/Off
Turning confirmation prompts off will stop the system
from confirming your choices (e.g., the UConnect
t
sys-
tem will not repeat a phone number before you dial it).
•
Press the PHONE button to begin.
•
After the
9
Ready
9
prompt and the following beep, say
9
Setup Confirmations.
9
The UConnect
t
system will
play the current confirmation prompt status and you
will be given the choice to change it.
Phone and Network Status Indicators
If available on the radio and/or on a premium display
such as the instrument panel cluster, and supported by
your cell phone, the UConnect
t
system will provide
notification to inform you of your phone and network
status when you are attempting to make a phone call
using UConnect
t
. The status is given for roaming, net-
work signal strength, phone battery strength, etc.
Dialing Using the Cellular Phone Keypad
You can dial a phone number with your cellular phone
keypad and still use the UConnect
t
system (while dial-
ing via the cell phone keypad, the user must exercise
caution and take precautionary safety measures). By
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99
3