• Loosen the child seat adjusters on
the lower straps and tether straps so
that you can attach the hook or
connector to the lower and tether
anchorages more easily.
• Attach the lower hooks or connectors over the top of the anchorage bars,
pushing aside the seat cover material. The rear seat lower anchorages are
round bars, located at the rear of the seat cushion where it meets the
seatback. The rear seat lower anchors can be readily identified by the
symbol
located on the seatback directly above the anchorages and are just
visible when you lean into the rear seat to install the child restraint.
• The tether strap should be attached to the tether anchor on the rear of the
seatback using the most direct path. For the outboard seating positions, route
the tether underneath the head rest and attach the hook to the tether anchor
located on the back of the seat.
• Tighten all three straps as you push
the child restraint rearward and
downward into the seat.
Installing The Child Restraint Using The Vehicle Seat Belts
• To install a child restraint, first, pull enough of the seat belt webbing from the
retractor to route it through the belt path of the child restraint and slide the latch
plate into the buckle.
• Next, extract all the seat belt webbing out of the retractor and then allow the
belt to retract into the retractor. Finally, pull on any excess webbing to tighten
the lap portion around the child restraint. Any seat belt system will loosen with
time, so check the belt occasionally, and pull it tight if necessary.
GETTING STARTED
12
Summary of Contents for 2001 Liberty
