Jedo Koda, Manual

Page: 13 / 28

15. FIVE-POINT SAFETY BELT ADJUSTING
The seat is equipped with five-point safety belts. To
install the belts on the seat, put the ends of the harnesses
(plastic buckle) through the holes located in the seat
backrest, under the fabric, and through the metal handles
located on the both sides of the seat.
In the same way, we mount the part of the belt located
between the legs of the child. This should be used from
the day when a baby starts to sit up unaided. Taking the
forks out from the central buckle, undo the belts. Place
the baby, adjust the length of the belts so as they are
close to baby’s body, but they must not oppress the
baby. Then plug the forks of all the belts into the central
buckle (Photo no. 16).
The seat has an additional crotch strap which must be
pinned to the frame with a snap. This is an additional
element and does not exempt from the application of
5-point safety belts.
Warning! Always use the safety belts if the child can sit
unaided.
16. SETTING OF SUSPENSION STIFFNESS
The stroller has got adjustment of the stiffness of rear
suspension. To adjust it, move the lever under the shock
absorber spring (Photo no. 17, 18). This action should
be made on both rear wheels. The suspension has two
settings: hard and soft.
17. ADJUSTMENT OF THE SPRING SHOCK ABSORBER
Model KODA was equipped with additional spring shock
absorber with adjustable damping.
To change the settings of the shock absorber turn the
knob left or right.(Photo no. 19)
WARNING! Both shock absorbers should always be
installed in the same position.
18. RAIN COVER
The stroller is equipped with a rainproof cover with vents.
To mount it, slide one end onto to the hood, and the
other onto the carry cot (from the side of the lever).
19. MOSQUITO NET
The carry cot is equipped with a mosquito net; to mount
it, slide one end (marked INSERT) onto the hood and
attach it with press-studs located on both sides, then
hook the other end of the mosquito net to the carry cot.
20. CAR SEAT INSTALLATION
The stroller is also manufactured in a version with a car
seat, for children weighing from 0 to 13 kg. In order to
install the car seat, first put the adapters on the stroller
chassis, plugging them identically as for the carry cot,
then mount the seat on the adapter. It plugs in
automatically.
WARNING! Before using the seat, make sure that the
adapters are properly mounted.
In order to unplug the adapters, press the button on the
side of the seat, repeat for the other side.
WARNING! The car seat, used together with the chassis,
does not replace a crib or bed; should the child needed
to sleep, it is recommended to place it in a proper carry
cot, crib or bed.
Using proper manufacturer adapters, the KODA
stroller may be used with the following seats:
1. Adapter VM:
-Maxi – Cosi : Cabriofix, Citi, Pebble, Pebble Plus, Rock
-Kiddy: Evolution Pro2,Evo- Lunafix, Evoluna i-size
-Safety 1st : Mimas, One safe
-Recaro: Privia, Privia Evo, Guardia
- Avionaut: Ultralite, Kite
- Besafe: Izi go, Izi go Modular
- Babysafe: York, Basset
2. Adapter VR
-Romer: Baby - safe, Baby- safe Plus SHR II,
Baby - safe i- size
3. Adapter VC
- Cybex: CBX, Aton 5, Aton
Q
, Aton
M, Cloud
Q