Jedmed EF-N Instructions For Use Manual Download Page 17

 

LEAK TESTIN

G

St

ep 1

PRE-CLEA

N

IN

G

St

ep 2

1.  W

ipe Insertion T

ube

and distal tip immediately  after removal from patient using alcohol wipe.

2.  Remove 

All Parts

Fiberoptic cable Fiberoptic adaptors Video equipment

3.  Perform Leak T

est (dry)

 Attach leak tester to scope

 Pump up to 160mmHg

 W

ait one (1) minute

If pressure falls more than  10mmHg in one (1) minute scope fails.  

Do not use (contact JEDMED)

If scope passes go to Step 2

   

Clean scope immediately after use.*

Do NOT allow debris to dry on scope.

      Remove all Loose        Material Deposits

Hold scope under lukewarm,  running tap water

.

Gently wipe with cloth from  scope body to distal tip.

Concentrate on insertion  tube and distal tip windows.

Do not twist insertion tube!

Use soft toothbrush or similar 

on difficult areas.

Rinse thoroughly

.

Pat dry** with cloth.

Immediately go to Step 3

CLEAN

IN

G

St

ep 3

1.  Prepare Enzymatic 

 

 

     Detergent / Clean Scope

Follow manufacturer

’s 

instructions carefully

.

Do not over-dilute or under-dilute.

Completely immerse scope in  detergent bath.

Brush and wipe scope until no  visible debris remain.

Continue brushing/wiping for two  (2) additional minutes.

Pay special attention to insertion  tube, distal tip windows, heavily  soiled areas and physician contact  areas.

2.  Rinse Thoroughly

Immerse scope in clean basin  of fresh, lukewarm tap water

.  

Agitate gently

.  Remove and 

rinse under lukewarm running tap water

.  Rinse until all 

detergent has been removed.

3.  Dry Thoroughly

Dry with medical-grade forced air  until completely dry**.

4.  Re-Inspect

Visibly re-inspect and re-clean if  any debris is found.

DISIN

FECTION

(High-Level)

St

ep 4

1.  Fully Immerse Scope 

      in high-level disinfectant solution.

Follow manufacturer

’s 

instructions carefully

.

Allow scope to soak specified 

time (use timer).

Remove scope from disinfectant.

2.  Rinse Thoroughly

Immerse in basin of sterile or  clean tap water

.   

Agitate gently

.  

Discard water

.  Repeat above 

two (2) additional times.  

Rinse 

until all disinfectant has been  removed.

3.  Dry Thoroughly

Dry with medical-grade forced air 

until completely dry**.

4.  Functionally T

est Scope

ENZOL

® 

Enzymatic Detergent

Do N

OT use ult

rasonic cleaner!

STORAGE

St

ep 5

1.  

Assure Scope is 

     Completely Dry

2.  Store Scope

in a covered drawer

enclosed storage cabinet or  original storage case.  

Area 

should be well-ventilated and  dust-free.

Keep insertion tube and  angulation section straight.

Cleaning / Disinfecting Procedure

Ergo-Flex Laryngo-Nasopharyngoscopes

* Note: Clean scope immediately after use.  Do NOT

 allow bio-materials to dry on scope, as cleaning is much more 

difficult.  Residual bio-burden significantly decreases ef

fectiveness of disinfectants.  

              Ef

fective cleaning is the most important part of the disinfection process.

** Note: Drying is critically important to minimize formation o

f biofilm.  Biofilm will form on any surface containing non-steri

le water

.  Biofilms significantly decrease ef

fectiveness of disinfectants.

ENZOL

®

, CIDEX

® 

and CIDEX

®

 OP

A are registered trademarks of 

ADV

ANCED STERILIZA

TION PRODUCTS, Division of Ethicon Inc., a Johnson & Johnson Company

.

Steris 1E

®

 is a registered trademark of STERIS Corporation.

www

.JEDMED.com 314-845-3770

Steris 1E

®

 Processing

1.  Disinfect / Rinse Scope

Follow manufacturer

’s 

instructions carefully

.

2.  Dry** Thoroughly

Dry with medical-grade forced air  until completely dry**.

3.  Functionally T

est Scope

All 

cleaning 

and 

disinfecting 

to 

be 

performed only by appropriately-trained  individuals.

Always use “Universal Precautions”  and protective attire when working with  potentially infectious material.

Only the aforementioned  methods and  products have been validated.  Do not  deviate.

All 

cloths 

and 

brushes 

should 

be 

clean, 

lint-free and single-use.

Be particularly careful not to damage 

fiber bundle or optics while cleaning.

Refer to Ergo-Flex Instruction Manual  for additional information.

Ef

fective cleaning and disinfecting is 

absolutely required to avoid cross- contamination between patients.

12-2015  Rev 2                                                   Copyright © 2013    JEDMED Instrument Company    

All rights reserved. 

       

Read and follow these instructions completely!

CIDEX

®

 2.4%         CIDEX

®

  O

PA

 

Activated Dialdehyde

STERIS

®

 Revital-Ox

TM

 Resert

®

  

High-Level Disinfectant

(USA-Australia-New Zealand-

Europe-Middle East)

Summary of Contents for EF-N






























Reviews: