Advanced Settings
- 17 -
meets the following requirements.
The camera is ON and functions. The SD card has enough space. 8 AA batteries with
enough power capacity. The camera is in Cam mode or Cam+Video mode, not Video
mode.
SIM card is installed. The MMS service is activated (some MMS services need pre-paid
balance in the account.) The SIM card is not password-protected.
Only when the switch is in
OFF
position, you install the MMS-module battery box.
The signal is strong in the field. The recipient’s phone number and/or email account is
entered correctly. You are suggested to take the receiving phone with you and do the
send-and-receive test on site.
MMS parameters are set correctly.
The Timer function is OFF. If you have the Timer ON, make sure you are in the specified
time period when expecting incoming MMS pictures.
Make sure MMS Status is not set OFF.
The setting is “0”, or the
daily limit has not been reached. If the daily limit has been reached, you can reset that
number on your computer or on the TFT display. Then the daily limit starts to count from
No. One.
The camera is stationary while sending MMS pictures.
3.6
View Local MNPO name and Signal Strength on TFT Display
You can find your local Mobile Phone Network Operator’s name and the signal strength on
the TFT display on the camera, just like you can see the information on a regular cell phone.
Install the SIM card and 8 AA batteries. Make sure the camera is switched in OFF position.
Attach the MMS-module battery box to the camera. Switch to the TEST position. If you like,
you can connect the camera to a TV, using provided TV AV IN cable. Wait for one minute and
then you will be able to view the MPNO name and the signal strength on the TV. If you don’t
have an access to a TV, wait for one minute and detach the battery box. Then you can view the
information on the TFT display.
http://www.jedmark.co.uk
