Advanced Settings
- 11 -
still photos only)
03 Photos
sequence per burst in Camera mode.
Please also refer to the
Interval
parameter.
Video Length
(affects
video clips only)
Avi 10 s
, optional from
1s to 60s
Videos are in AVI format that can be
played back on most media players.
Interval
1 Min
, optional from
1S to 60M
Select the length of time that the camera
will wait from when the last picture was
taken and written in the SD card, until it
responds to any new triggers from the
PIR sensor. During the selected interval,
the camera will not take pictures/videos.
This prevents the SD card from filling up
with too many redundant images.
Sense Level
Normal
, High, Low
Select the sensitivity of the PIR sensor.
The High setting suits indoors and
environments with little interference,
while the Normal/Low suits outdoors
and environments with more
interference. Temperature also affects
the sensitivity. The High setting is
suitable when the ambient temperature is
warm, and the Low setting is helpful in
cold weather.
Time Stamp
(affects
still photos only)
On
, Off
Select
On
if you want the date & time
imprinted in every photo.
Timer
Off
, On
Select
On
if you only want the camera to
work within a specified time period
every day. For instance, if the starting
time is set at 18:35 and the ending time
at 8:25, the camera will function from
18:35 the current day to 8:25 the next
day. Outside the time period the camera
will not be triggered or take
photos/videos. This feature can be used
together with
Time Lapse
feature.
Password Set
Off
, On
Set up a password to protect your camera
from unauthorized users.
Serial No.
Off
, On
Select
On
to assign a serial number to
each camera you have. You can use the
combination of 4 digits and/or alphabets
to record the location in the photos (e.g.
YSP1 for Yellow Stone Park). This helps
multi-camera users identify the location
when reviewing the photos.
http://www.jedmark.co.uk
