•
Lock: To prevent changes from inadvertently occurring by
accidentally knocking the adjustable control knob, press and hold the
'SPEED/LOCK' button for 5 seconds. The red 'LOCK' light will
illuminate and the control knob will no longer function. Press and
hold the 'SPEED/LOCK' button for a further 5 seconds to disable this
feature.
•
Night: When the two-pinned light sensor is inserted into the small
socket on the left-hand side of the control box, night mode will
function automatically. The sensor detects when the tank lights go
out and slows the pump to half speed. The 'Sensor' LED will
illuminate when night mode is in operation. To disable the night
mode function, remove the sensor from the control box.
Maintenance:
•
Regularly clean the outer parts to ensure effective action
•
Use a dry cloth to prevent water from entering the controller box
•
To disassemble the wave maker for cleaning - disconnect power,
remove the pump from the cradle and whilst holding the rear
section of the pump turn the front grid by rotating it clockwise - see
images below:
•
To re assemble, reverse the disassembly instructions. Be sure when
fitting the front grid that the ceramic shaft is located into the
bearing. Once in position, turn the front grid clockwise until you
hear a loud click, indicating that the pump is assembled correctly.
Disposal:
Do not dispose this product as unsorted municipal waste.
Collection of such waste separately for special treatment is necessary.
Jebao Co., Ltd.
Tongmao Industrical Park, Dongsheng, Zhongshan, Guangdong. China.
Email:[email protected]
Website: www.jebao.com
Tel: +86-760-22212306, 22212307
Fax:+86-760-22212368
Front grid to remove
Hold this section firmly
Rotate front section
anti clockwise
Pump disassembled
WP-40 =130mm
WP-25 = TBC
WP-40 = 100mm
WP-25 = TBC
