Jeanneau SUN ODYSSEY 440, Owner'S Manual, Page: 128 / 240

- 128 -
189212 RCD-2
Index C
To change an LPG bottle
1. Close the tap on the LPG bottle
2. Detach the LPG bottle
3. Replace the LPG bottle
4. Attach the new LPG bottle
5. Open the tap on the LPG bottle
- When the cooker is on, ventilate well to prevent any risk of asphyxiation.
- Do not use the cooker as a means of heating.
- If a leak or fire from an LPG tank is detected, close the main LPG supply valve
and do not use LPG appliances.
- Do not use an installation with a leak before it has been inspected and repaired
by a competent person.
- Do not modify the boat’s LPG system. The installation, modification and
maintenance should be carried out by a competent person. Have the system
checked at regular intervals or as fixed by national requirements.
- Never use a naked flame to check for leaks.
- Do not use a hotplate or an oven to heat the living areas.
- Equipment with a naked flame burning fuel consumes the oxygen in the cabin
and gives out combustion residue in the boat. Ventilation is necessary when this
equipment is used.Open the vents provided for this when using this equipment. Do
not use a hotplate or an oven to heat the living areas. Never obstruct the vents
provided for ventilation.
- Ventilation requirements have been calculated for LPG appliances as installed.
Additional ventilation openings may be required if other appliances are installed
simultaneously (please consult a professional).
- Never leave the boat unsupervised when equipment using LPG with a naked
flame is on.
- Do not smoke or use a naked flame when replacing LPG bottles. Close the tap
on the empty bottle before detaching it to replace it.
- To ensure sufficient ventilation, make sure that you open the hatches or ports
near the hotplate when using it
- Do not use solutions containing ammonium when testing for leaks manually
(ammonia, which is present in certain soaps and detergents, attacks brass
connections. Although the damage may at first be impossible to detect, the cracks
and leaks may appear several months after the contact with the ammonia)).