Jeanneau NC14 Page 98 Owner'S Manual Download

Page: 98 / 108

- 98 -

9.5 EXTERNAL GRILL

- The grill runs on an AC power supply.

- A breaker protects the electrical circuit.

- A safety cut-out switch is mounted on the lid: the act of shutting the lid automatically turns
the grill off immediately.

9.6 WINE CELLAR

The wine locker is supplied by a DC/AC inverter located nearby.

- Refer to manufacturer's instructions for use and maintenance.

- It is forbidden to use the grill when at sea.

- Ensure that the grill has cooled before closing the lid.

1. Indicator light - AC supply

2. Display

3. Indicator light - Operation

4. Temperature reduction

5. Teemperature increase

6. Indicator light - Voltage presence

7. Light

8. Cooling indicator

9. Control ON / OFF

Leave the ventilation openings clear.

Summary of Contents for NC14













































































































Search results

Summary of Contents for NC14

Reviews:

Related manuals for NC14

Brands by name

Popular brands

Jeanneau NC14, Owner'S Manual

Search results

Summary of Contents for NC14

Reviews:

Related manuals for NC14

Brands by name

Popular brands