Jeanneau CAP CAMARAT 925 WA, Owner'S Manual

Page: 79 / 86

75/82
084807
Index H
HOISTING
- Install a fore rope, a rear rope and fenders.
- When hoisting, check that no device is crushed by the belts (sounder, speedometer
etc.).
- Mark the belt position with adhesive tape on the rubrail. The belt position will be useful
during the craning for a future launching.
- The crane hook will be fitted with a gantry or a spacer with two belts. The belts shall
not be hooked directly on the hook, since it would result in unusual compressive
stresses on the hull.
- Hoist slowly. Control the movement of the boat with ropes.
AFTER LAUNCHING
- Check the sounder and speedometer fittings for tightness if need be.
- Open the valves and make sure that they are tight with the hull and relevant hose.
- Before starting the engine, refer to chapter 8 "Engine".
WARNING
Do not stay on board or under the boat during hoisting.
9
L
A
U
N
C
H
IN
G