CLEAN-UP & STORAGE
Shutting down the Pressure Washer
When you have finished using the Pressure Washer, follow
these steps to shut the unit down:
• Turn the Pressure Washer to the OFF position.
• Turn off the water supply.
• Unplug the Pressure Washer from the power source.
• Before disconnecting the high pressure hose connection,
point the gun in a safe direction and discharge the high
pressure water.
• Disconnect the high pressure hose from the trigger gun.
• Disconnect the high pressure hose from the main body.
• Disconnect the garden hose from the Pressure Washer.
• Remove excess water from the pump by tipping the unit on
both sides to drain any remaining water from the inlet and
outlet fittings and be careful to not damage the unit.
• Remove the Water Intake Filter from the water inlet
connector and flush with water to remove dirt or debris.
Replace the filter once cleaned.
• Wipe away any remaining water on all parts and fittings.
• Engage the trigger gun safety lock.
• Store the trigger gun and the power cord on the provided
power cord hook and trigger gun holder respectively.
• Store the Pressure Washer, parts, and accessories in an
area with a temperature above 0
°
C (32
°
F).
1
7
Summary of Contents for ZQ661
