JDW ZQ661, Instruction Manual

Page: 12 / 24

BEFORE FIRST USE
Starting Up
Ensure that the area in which you will be using the Pressure
Washer is clear and free from people and animals. Ensure
that the area you are using the Pressure Washer on is clear
of sharp objects and debris. Due to the high power water jet,
objects are subject to movement.
After connecting the pressure cleaner to your cold water
supply, proceed as follows :
- Make sure that the ON/OFF switch is in the OFF
position.
- Connect the garden hose to the inlet fitting.
- Insert the adjustable spray no zz le into the gun as per
assembly step # 1.
- Connect the high pressure hose to the high pressure
outlet fitting as per assembly step # 3 .
- Connect the high pressure hose to the gun, as per
assembly step # 4.
- Open the water supply valve completely.
- Before turning the unit on, press the gun trigger to bleed
all the remaining air out of the pump and hose.
- Start the pressure cleaner by turning the on/off switch to
the on position and s q uee z e the trigger. R EMINDE R: Motor
does not run continuously, only when the trigger is s q uee z ed.
WA R NING
–
R IS K OF IN JURY! U nit will start spraying when
trigger is s q uee z ed. When turning the unit off after use, high
pressure still e x ists inside the hose and unit. Point the gun in a
safe direction and discharge the e x cess pressure. NE V E R
direct the high pressure water stream at people or animals.