background image

04

Maintenance and storage

– Keep all nuts, bolts and screws tight to be sure the machine 

is in safe working condition.

– Replace worn or damaged parts.

– Use only genuine replacement parts and accessories

– Store the machine only in a dry place.

Recommendations

– Avoid using the machine in bad weather conditions 

especially when there is a risk of lightning.

Residual Risks

Even when the tool is used as prescribed it is not possible to 

eliminate all residual risk factors. The following hazards may 

arise in connection with the tool’s construction and design:

1. 

Damage to lungs if an effective dust mask is not worn.

2. 

Damage to hearing if effective hearing protection is not 

worn.

3. 

Health defects resulting from vibration emission if the 

power tool is being used over longer period of time or not 

adequately managed and properly maintained.

WARNING! This machine produces an electromagnetic field 

during operation. This field may under some circumstances 

interfere with active or passive medical implants. To reduce 

the risk of serious or fatal injury, we recommend persons with 

medical implants to consult their physician and the medical 

implant manufacturer before operating this machine.

Summary of Contents for ZQ561


















Reviews: